- 28
- Nov
- 2020
OSHA Frequently Cited Violations for: Control of Hazardous Energy (lockout/tagout)
An Overview of Most Frequently Cited Lockout/Tagout Standards by OSHA
- Establish a LOTO Program
- Develop Machine Specific Procedures
- Conduct Periodic Inspections
- Provide Lockout/Tagout Training
If you have any questions contact Sam Joshi, P.E. at (215) 389-2811.
Post Tagged with compliance, Control of Hazardous Energy, EHS, joshiEHS, lockout, LOTO, OSHA, Safety, tagout
Recent Posts
TEST
- Overview of Industrial Stormwater Permit Regulations
- 8 points to remember regarding SPCC Plans (& recommendations)
- Nine Steps to Environmental, Health & Safety (EHS) Excellence
- 12 common RCRA violations and how to avoid them
- Community-Right-To-Know (CRTK) Primer
- Stormwater Sampling Primer
- Lockout/Tagout: (#4 on OSHA’s Top 10 list of most-cited violations)
- OSHA General Duty Clause for employers & employees
- OSHA Frequently Cited Violations for: Control of Hazardous Energy (lockout/tagout)
- A check-list to assess if your facility is in compliance with federal refrigerant regulations (40 CFR 82, Subpart F).
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | ||||
| 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| 25 | 26 | 27 | 28 | 29 | 30 | |
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | ||||
| 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| 25 | 26 | 27 | 28 | 29 | 30 | |